Install Printer DriverTo install printer driver, please double click on the.dmg (for example:ARGOXmacOSPrinterDriverV1.3.01.dmg) file to load the disk (for example:ARGOXmacOSPrinterDriverV1.3.01). See “Step A” in Figure 3.A.B.
![]()
TSC’s Mobile Barcode Printers, Mobile Printer. TSC is one of the fastest-growing companies in the Auto-ID industry, offering a diverse line of rugged, competitively priced thermal label printers. Printer Driver. Last modified Jun 31, 2020. These drivers are only for use with Toshiba Tec Barcode Printers. Toshiba Tec and its subsidiaries cannot take any responsibility for damage caused by the use of these drivers. Driver Files - The driver file which you download will be zip file or exe file.
![]()
Double click on the loaded disk to open the disk then we can see the printer driver package. See“Step B” and the printer driver package in Figure 3.A.C. Double click on the printer driver package to open the printer driver installer. See Figure 3.B.Click “Continue” button to go to the next step.D. In the “Installation Type” dialog, click “Install” button to continue. See Figure 3.C.E. Input password and click “Install Software” button to go to next step.
See Figure 3.D.F. The installer is starting to install the printer driver. After a while, the installation successful dialog is displayed.
See Figure 3.E. Click “Close” button to finish the printer driver installation process.Note: Sometimes, the macOS printer driver will be delivered to our customers in Windows OS.The printer driver package will become folders and files in Windows OS, so we package itto a dmg file to avoid this problem.4. Uninstall Printer DriverA.
To uninstall printer driver, please double click on the.dmg (for example:ARGOXmacOSPrinterDriverV1.3.01.dmg) file to load the disk (for example:ARGOXmacOSPrinterDriverV1.3.01). See “Step A” in Figure 3.A.B. Double click on the loaded disk to open the disk then we can see the uninstall printer driver scriptfile.
See “Step B” and the uninstall printer driver script file in Figure 3.A.C. Double click on the uninstall printer driver script file to execute the uninstalling printer driverprocess. See Figure 4.A.The uninstall printer driver script file is set to executable, so we can run it by double clicking it.D. When the uninstall printer driver script file is executed, it is necessary to input the password when logging in to the system. See Figure 4.B.Input the password and press “Enter” key to continue. The password is not displayed.D.
When there is no ARGOX macOS printer driver installed and the uninstall printer driver script fileis executed, the message strings are displayed. See Figure 4.C.E. When there is ARGOX macOS printer driver installed and the uninstall printer driver script fileis executed, the message strings are displayed. See Figure 4.D.F.After the printer driver is uninstalled, the related installed printer cannot be used any more.Please delete the related installed printer then follow the step described in section 3. InstallPrinter Driver to install the printer driver, also follow the step in section 5. Add Printer to add thenew printer.5. Add PrinterWe can add printer easily by using the “Printers & Scanners” utility in System Preferences.
See Figure 5.A.5.1. Add Printer via USB PortThe procedures for adding printer in macOS via USB port are as following:A. Connect the printer with USB cable to Mac computer and make sure the printer is powered on and in Ready status.B. Click “Prints & Scanners” in “System Preferences” dialog to open the “Printers & Scanners” dialog. See Figure 5.1.A.In this dialog, we can see the added printers in the Printer list and the information of the added printers.To delete the selected printer, we can click on the “-” symbol on the left-bottom side of the dialog.By clicking the “+” symbol on the left-bottom side of the dialog, we can add the new printer. See Figure 5.1.B.FigureC. Select the connected USB printer to be added in “Default” tab, the name and the location will be displayed.
See Figure 5.1.B.D. Click “Select Software” in “Use” combo-box to select the printer software. See Figure 5.1.C.E.
After “Select Software” is clicked, the “Printer Software” dialog is displayed. See Figure 5.1.D.Select the software name matches the printer model to be installed then click “OK” button to go to the next step.F.
After the printer software is selected, the name of the printer software will be displayed in the “Use” field. See Figure 5.1.E.Please make sure the selected printer software name matches the printer name, otherwise the printer settings may be incorrect or the print job may not be printed out correctly.Click “Add” button to add the printer.G. After the add printer procedure is finished, the added printer will be displayed in the “Printers” list in the “Printers & Scanners” dialog. See Figure 5.1.F.H. We cannot print test page in “Printers & Scanners” dialog. To print test page, we need to open the CUPS web page by connect to the URL “with browser.We can select “Print Test Page” under Maintenance menu to print the test page.See Figure 5.1.G.
If the test page can be printed out correctly, the printer is ready to be used.5.2. Add Printer via Network PortThe procedures for adding printer in macOS via network port are as following:A. Connect the printer with network cable to network and make sure the printer is powered on and in Ready status.Please make sure that there is response when pinging the printer IP address form the Mac computer that we used to add the printer. If there is no response, it means the Mac computerthat we used to add the printer cannot connect to the printer via network. In this situation, the print job also cannot be printed out.B. Click “Prints & Scanners” in “System Preferences” dialog to open the “Printers & Scanners” dialog.
See Figure 5.2.A.In this dialog, we can see the added printers in the Printer list and the information of the added printers.To delete the selected printer, we can click on the “-” symbol on the left-bottom side of the dialog.By clicking the “+” symbol on the left-bottom side of the dialog, we can add the new printer. See Figure 5.2.B.C. Select the “IP” tab. See Figure 5.2.B.In this tab, please do the following settings:a. Input the IP address of the printer in “Address” field.b. Set the protocol to “Line Printer Daemon – LPD”.c. Input the queue name in the “Queue” field. It is recommended to input the name which can beeasily recognized.D.
Click “Select Software” in “Use” combo-box to select the printer software. See Figure 5.2.C.E. After “Select Software” is clicked, the “Printer Software” dialog is displayed. See Figure 5.2.D.Select the software name matches the printer model to be installed then click “OK” button to go to the next step.F. After the printer software is selected, the name of the printer software will be displayed in the “Use” field. See Figure 5.2.E.Please make sure the selected printer software matches the printer model, otherwise the printer settings may be incorrect or the print job may not be printed out correctly.Click “Add” button to add the printer.G. After the add printer procedure is finished, the added printer will be displayed in the “Printers” list in the “Printers & Scanners” dialog.
See Figure 5.2.F.H. We cannot print test page in “Printers & Scanners” dialog. To print test page, we need to open the CUPS web page by connect to the URL “with browser.We can select “Print Test Page” under Maintenance menu to print the test page. See Figure 5.2.G.
![]()
If the test page can be printed out correctly, the printer is ready to be used.6. Media CalibrationTo detect the media gap or mark correctly when print job with macOS printer driver, it is necessary to do media calibration before the first print.The media calibration method is described as below:A. DO NOT print the page immediately after the printer driver is installed.B.
Create a test page with the selected media size (for example: 4″x3″) and load the label with thesame size.C. Set Media Calibration to Enable in Print dialog as Figure 6.A.a. Select “Print” menu in the application.b. Set “Media Calibration” to Enable.c. Click “Print” button.At this condition, printer driver will send command to the printer to execute media calibration and the test page datawill be sent by printer driver to the printer.
Then the test page will be printed out by the printer.After the media calibration is executed, it is necessary to set media calibration to “Disable” before the normal printing,otherwise media calibration will be executed again by again.D. Set Media Calibration to Disable. See Figure 6.B.a.
Select “Print” menu in the application.b. Set “Media Calibration” to Disable.c. Click “Cancel” button.After the Media Calibration is set to Disable, printer driver will process the printing data and send the printing data to the printer to print out.Now the label can be printed correctly.This entry was posted in,. Bookmark the.
![]() Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
January 2023
Categories |